|
| Polyethylene & Fiberglass Septic Tanks: |
| |
 |
| |
- 16 different tank sizes available
- Sizes range from 300-gallons to 1500-gallons
- 15 factories nationwide to serve you
- Underground water storage cisterns also available
- See below for product line details
- Vertical Ribbed Sidewalls (Poly septic tanks) - Substantially wide ribs run vertically top to bottom dramatically increasing both the strength and durability of the poly septic tanks.
- New Heavy-Duty Ribbed Baffles (Fiberglass septic tanks) - Reinforced baffles in our fiberglass septic tanks are bonded to the tank with strong fiberglass putty to withstand all kinds of stress.
- Low-Profile Design - Makes for less excavating and easier installation of the septic tank.
- IAPMO Approved - All counties require the stamp of approval from the International Association
of Plumbing and Mechanical Officials on septic tanks before they can be installed .
- Warranties - Fiberglass septic tanks: 5 Years; Poly septic tanks: 3 Years.
- Economical - With all of their features and benefits, we're confident you'll find TRS poly
septic tanks and fiberglass septic tanks the best value for wastewater systems today
Polyethylene & Fiberglass vs Concrete & Steel Septic Tanks
|
- Easier to Install - No heavy equipment is needed to transport or install our septic tanks. This is
a valuable advantage in rough or inaccessible area and in wet weather conditions.
- Longer Life Span - These septic tanks are unaffected by the gases created by sewage so they
won't deteriorate like concrete or steel tanks.
- Non-Porous Material - Roots will not penetrate poly septic tanks and fiberglass septic tanks as
they can with concrete septic tanks.
- Easier to Repair - In the unlikely event of damage, poly septic tanks and fiberglass septic tanks can be repaired much more easily than concrete or steel septic tanks.
|
| |
 |
| |
| TRS Fiberglass Septic Tanks |
| CAPACITY |
L x W x H |
WEIGHT |
INLET* |
OUTLET* |
CMPTS |
| 750 Gallon horizontal |
93.5" x 71.5" x 67" |
320 lbs |
54" |
52" |
2 |
| 1000 Gallon horizontal |
115" x 72.5" x 67" |
370 lbs |
54" |
52" |
2 |
| 1250 Gallon horizontal |
142" x 75" x 68" |
430 lbs |
54" |
52" |
2 |
| 1500 Gallon horizontal |
161" x 75" x 68 |
470 lbs |
54" |
52" |
2 |
*From bottom of tank to bottom of hole |
|
|
| |
- Extra Fiberglass Lids
- Fiberglass Risers (24" Diameter x 24" Height)
- Septic Tank Effluent Filters
- 4-Hole or 6-Hole Distribution Boxes
- Diverter valves
- Other accessories for fiberglass on site tanks
|
| |
| |
| SEPTIC TANKS SPECIFICATIONS-SINGLE COMPARTMENT |
|
|
| |
| SEPTIC TANKS SPECIFICATIONS-DOUBLE COMPARTMENT |
|
|
| |
NUCONCEPT PLUS-SINGLE COMPARTMENT-stronger no water needed
at installation, low profile design |
| Part No. |
Gallon Capacity |
Tank Available |
Length |
Width |
Height |
No. of
Manholes |
| 1000900W95301 |
500 Low Profile |
L,M,P |
88" |
48" |
42" |
1-24" |
| 1001200W95301 |
750 Low Profile |
L,M,P |
96" |
60" |
51" |
2-24" |
| 1001100W95301 |
900 Low Profile |
M,P |
111" |
60" |
51" |
2-24" |
| 1001000W95301 |
1050 Low Profile |
L,M,P |
126" |
60" |
51" |
2-24" |
| 1001400W95301 |
1250 Low Profile |
L,M,P |
146" |
60" |
51" |
2-24" |
| 1001500W95301 |
1500 Low Profile |
L,M,P |
176" |
60" |
51" |
2-24" |
*From bottom of tank to bottom of hole |
|
|
| |
DOUBLE COMPARTMENT-stronger no water needed at installation, low
profile design |
| Part No. |
Gallon Capacity |
Tank Available |
Length |
Width |
Height |
No. of
Manholes |
| 1001200W95302 |
750 Low Profile |
L,M,P |
96" |
60" |
51" |
2-24" |
| 1001100W95302 |
900 Low Profile |
L,M,P |
111" |
60" |
51" |
2-24" |
| 1001000W95302 |
1050 Low Profile |
L,M,P |
126" |
60" |
51" |
2-24" |
| 1001400W95302 |
1250 Low Profile |
L,M,P |
146" |
60" |
51" |
2-24" |
| 1001500W95302 |
1500 Low Profile |
L,M,P |
176" |
60" |
51" |
2-24" |
Septic tanks are furnished pre-plumbed with inlet and outlet tees, gaskets, and manhole covers. With the exception of the 300 gallon and 500 gallon sphere tanks, SEPTIC TANKS ARE NOT BE BE USED AS PUMP TANKS OR HOLDING TANKS WITH PUMPS IN THEM. |
|
|
| |
| PUMP TANKS |
| Part No. |
Gallon Capacity |
Tank Available |
Length |
Width |
Height |
No. of
Manholes |
| 5260000W95301 |
300 Sphere |
A |
48.5" |
48.5" |
49.5" |
1-24" |
| 5170000W95201 |
500 Sphere |
A |
60" |
60" |
59.5" |
1-24" |
| 1001101W95301 |
900 Pump |
L,M,P |
96" |
60" |
51" |
2-24" |
| 1001001W95302 |
1050 Pump |
M,P |
126" |
60" |
51" |
2-24" |
| 1001001W95301 |
1050 Pump NC |
M,P |
126" |
60" |
51" |
2-24" |
| 1001401W95304 |
1250 Pump |
L,M,P |
146" |
60" |
51" |
2-24" |
| 1001501W95304 |
1500 Pump |
L,M,P |
175" |
60" |
51" |
2-24" |
Sphere pump tanks are furnished with manhole covers only |
|
|
| |
| CISTERN SPECIFICATIONS-BELOW GROUND |
|
|
| |
| |
 |
| |
| Snyder Industries NuConSept Poly Septic Tanks |
| Part No. |
CAPACITY |
L x W x H |
WEIGHT |
INLET* |
OUTLET* |
CMPTS |
| 1000900w95301 |
300 Gallon Sphere |
49" x 49" x 50" |
110 lbs |
39" |
36" |
1 |
| 1000900w95301 |
500 Gallon Sphere |
60" x 60" x 60" |
215 lbs |
45.5" |
42.5" |
1 |
| 1000900w95301 |
750 Gallon Horizontal |
80" x 64" x 62" |
255 lbs |
51" |
48" |
2 |
| 1000900w95301 |
1050 Gallon Horizontal |
100" x 64" x 62" |
335 lbs |
51" |
48" |
2 |
| 1000900w95301 |
1250 Gallon Horizontal |
119" x 64" x 62" |
390 lbs |
51" |
48" |
2 |
| 1000900w95301 |
1500 Gallon Horizontal |
140" x 64" x 62" |
470 lbs |
51" |
48" |
2 |
*From bottom of tank to bottom of hole |
|
|
| |
These poly septic tanks are pre-plumbed with inlet and outlet tees, gaskets, and manhole covers. With the exception of the 300-gallon and 500 gallon sphere tanks, ABOVE SEPTIC TANKS ARE NOT TO BE USED AS PUMP TANKS OR HOLDING TANKS WITH PUMPS IN THEM |
| |
 |
| |
| Snyder Industries NuConSept Plus Low - Profile Poly Septic Tanks NEW! |
| Part No. |
CAPACITY |
L x W x H |
WEIGHT |
INLET* |
OUTLET* |
CMPTS |
| 1000900w95301 |
500 Gallon Horizontal |
88" x 48" x 42" |
190 lbs |
35" |
32" |
1 |
| 1001200w95301 |
750 Gallon Horizontal |
96" x 60" x 51" |
300 lbs |
45" |
42" |
2 |
| 10000900w97401 |
1050 Gallon Horizontal |
126" x 60" x 51" |
375 lbs |
45" |
42" |
2 |
| 1001200w95301 |
1250 Gallon Horizontal |
146" x 60" x 51" |
430 lbs |
45" |
42" |
2 |
| 1001200w95301 |
1500 Gallon Horizontal |
176" x 60" x 51" |
585 lbs |
45" |
42" |
2 |
*From bottom of tank to bottom of hole |
|
|
| |
These poly septic tanks are pre-plumbed with inlet and outlet tees, gaskets, and manhole covers. These low-profile poly septic tanks have a unique heavy-duty design, for those tougher installations. These tanks can be installed without water and can be backfilled with native free-flowing soil. The 750-1500 gallon models of the NuConSept Plus low-profile poly septic tanks can be used as holding/pump tanks.
- Schedule 40 PVC Inlet Tee Assembly
- Schedule 40 PVC Outlet Tee Assembly
- Tamper-Resistant Bolt Kit (4 bolts, 1 driver bit)
- Extra Poly Lids
- Manhole Extensions (24" Diameter x 12" Height)
- 24" Poly Lid with 6" Inspection Port
- 24" Poly Lid/Riser Combo with 12" Riser x 30" Height
- Septic Tank Effluent Filters
- 4-Hole or 6-Hole Distribution Boxes
- Diverter valves
- Other accessories for complete septic systems
|
| |
| Home | About Us | Driving Directions | Contact Us |
| |
